Failure analysis of pouch-type Li–O2 batteries with superior energy density

Li–O2 batteries have attracted significant interest in the past decade owing to their superior high specific energy density in contrast to conventional lithium ion batteries.An 8.7-Ah Li–O2 pouch cell with768.5 Wh kg^-1 was fabricated and characterized in this investigation and the factors that influenced the electrochemical performance of the Li–O2 pouch cell were studied.In contrast to coin/Swagelok-type Li–O2 cells,it was demonstrated that the high-loading air electrode,pulverization of the Li anode,and the large-scale inhomogeneity of the large pouch cell are the major reasons for the failure of Li–O2 batteries with Ah capacities.In addition,safety tests of large Li–O2 pouch cells were conducted for the first time,including nail penetration,crushing,and thermal stability.It was indicated that a self-limiting mechanism is a key safety feature of these batteries,even when shorted.In this study,Li–O2 batteries were investigated in a new size and capacity-scale,which may provide useful insight into the development of practical pouch-type Li–O2 batteries.     

丹酚酸A 对H2O2 所致大鼠脑微血管内皮细胞氧化损伤保护的实验研究

目的 观察丹酚酸A 对H2O2所致大鼠脑微血管内皮细胞（RCMECs）氧化损伤的保护作用，并探讨其可能的作用机 制。方法 分离并培养大鼠脑微血管内皮细胞，用H2 O2 损伤的方法建立氧自由基损伤模型。采用丹酚酸A 进行干预后，分别测定细胞培养液中乳酸脱氢酶（LDH）活性、血栓素B2（TXB2）水平、6- 酮基前列腺素1α（6-keto-PGF1α）的含量，以及细胞内和培养液中脂质过氧化产物丙二醛（MDA）含量和超氧化物歧化酶（SOD）的活性。结果 H2O2致RCMECs 氧化损伤后，细胞LDH 释放水平、TXB2和MDA 的含量均明显增加，同时6-keto-PGF1α 含量和SOD 活性显著下降；而丹酚酸A 预处理后能呈浓度依赖性的降低RCMECs 氧化损伤后LDH 水平、TXB2含量和细胞内外的MDA 含量，提高受损细胞6-keto-PGF1α 的表达和细胞内外SOD 活性。结论 丹酚酸A 对H2O2所致RCMECs 氧化损伤具有保护作用，其机制可能与其抗氧化作用有关。     

一种基于苯并噻二唑衍生物的F~-荧光探针分子的理论研究

用密度泛函理论研究了最近实验上合成的一种基于苯并噻二唑衍生物的F~-荧光探针(1)的性质.通过对相关化学反应热力学参数的计算,提出了1对F~-具有高选择性的可能原因;同时用含时密度泛函理论对电子吸收光谱和荧光发射光谱进行了理论计算,解释了实验光谱.     

(3S,4S)-4-氨基-3-羟基-6-甲基庚酸的合成

价廉易得的L-亮氨酸先以苄基同时保护氨基及羧基得(S)-2-(二苄胺基)-4-甲基戊酸苄酯,进而在碱性条件下与乙腈发生亲核取代反应得(S)-4-(二苄胺基)-6-甲基-3-氧代庚腈,再经硼氢化钠选择性还原羰基得(3S,4S)-4-(二苄胺基)-3-羟基-6-甲基庚腈,用双氧水氧化得(3S,4S)-4-(二苄胺基)-3-羟基-6-甲基庚酸,最后在Pd(OH)2/C-H2作用下脱掉苄基得到(3S,4S)-4-氨基-3-羟基-6-甲基庚酸,即(3S,4S)-statine。整个合成路线总产率为33.6%。     

HL-2M托卡马克装置低温液氦系统的初步设计

根据中国核聚变研究的发展需要,核工业西南物理研究院正在建造HL-2M托卡马克装置作为等离子体物理和受控聚变工程技术研究的实验平台。依计划,HL-2M装置将采用低温液氦系统为三台中性束低温泵、两台环形低温泵以及一套电子回旋共振加热系统提供共500W@4.5K的冷却。该低温系统由氦液化车间,氦回收纯化循环系统和低温用户的供给分配系统三部分组成,将兼顾超临界氦冷却模式和迫流冷却两种模式。由于每个用户都有特殊的工作要求,除电子回旋共振加热系统外,该系统为每个用户配置了独立的复合传输管线和低温分配阀箱,以减少用户间的互相干涉,确保低温用户安全稳定的运行。文中对此低温系统进行了分析研究并作出初步设计。     

相位校正器粘接局部应力控制技术

通过理论分析,对相位校正器的镜面与支撑结构间的粘接建立模型进行仿真研究,提出了在相位校正器镜片上加工小圆柱,使其粘接应力由镜片本身转移到突出部位的小柱子上,有效改善了相位校正器镜面局部粘接应力,使镜面局部高阶像差得到缓解,并通过试验验证了其有效性。     

Ni–Al composite hydroxides fabricated by cation–anion double hydrolysis method for high-performance supercapacitor

Chemical doping of nickel hydroxide with other cations(e.g. Al~(3+)) is an efficient way to enhance its electrochemical capacitive performances. Herein, a simple cation–anion(Ni~(2+)and AlO_2) double hydrolysis method was developed toward the synthesis of nickel–aluminum(Ni–Al) composite hydroxides. The obtained composite hydroxides possesses a porous structure, large surface area(121 m~2/g) and homogeneous element distribution. The electrochemical test shows that the obtained composite hydroxides exhibits a superior supercapacitive performances(specific capacitance of 1670F/g and rate capability of 87% from 0.5 A/g to 20 A/g) to doping-free nickel hydroxide(specific capacitance of 1227 F/g and rate capability of 47% from 0.5 A/g to 20 A/g). Moreover, the galvanostatic charge/discharge test displays that after 2000 cycles at large current density of 10 A/g, the composite hydroxides achieves a high capacitance retention of 98%, indicative of an excellent electrochemical cycleability.     

Microporous Hypercross-linked Conjugated Quinonoid Chromophores of Anthracene: Novel Polymers for CO2 Adsorption

Microporous hypercross-linked conjugated quinonoid chromophores represent a novel class of amorphous polymers, synthesized by the reaction of anthracene with dimethoxy methane in the presence of FeCl3 catalyst. Their N2 adsorption isotherms confirm their microporous nature. Diffuse reflectance UV-Visible(DRS UV-Vis) spectroscopy confirms their matrix built with the conjugated quinonoids by their broad light absorption characteristics extending from 1000 nm to 200 nm with the absorbance maximum close to 400 nm. The catalyst cross-linked anthracene with ―CH2― bridges and subsequently dehydrogenating them to form quinonoids. Their Fourier transform infrared(FTIR) spectra showed their characteristic quinonoid vibrations between 1600 and 1700 cm-1. The synthesis of polymers was carried out at 30, 40, 50, 60, 70 and 80 ℃, but the quinonoid content of the polymer obtained at 80 ℃ was higher than that of the others. Their scanning electron microscopy(SEM) images showed microspheres of 1 to 5 μm size built with tiny particles. Their surfaces were not smooth. The polymer synthesized at 80 ℃ showed 5.1 wt% CO2 sorption at 25 ℃ and 0.1 MPa, but when it was recross-linked, the CO2 sorption increased to 8 wt%. Hence, hypercross-linked conjugated quinonoid chromophores of anthracene are good for sorption of CO2.     

如何解释红外谱图

红外光谱(IR)主要提供分子的官能团和化学键的丰富的结构信息。通常一个化学键会出现多个不同位置的吸收峰,而图中每个峰又可能是不同化学键的加合峰。因此在红外光谱分析中,并不要求也不可能准确地归属出图中所有的峰,通常只要求能较确切地识别出其中几个特征峰已足矣。     

In situ synthesis of Ag-SiO2 Janus particles with epoxy functionality for textile applications

A facile method for the synthesis of silver-silica（Ag-SiO₂） Janus particles with functionalities suitable for textile applications is reported.Silica nanoparticles prepared by the Stober method were functionalized with epoxy,amine,and thiol groups,which were confirmed by Fourier transform infrared analysis.The functionalized silica nanoparticles were used to produce Pickering emulsions,and the exposed surface was used for the attachment of silver nanoparticles（AgNPs） via the low-temperature chemical reduction method.The morphology and structure of the Ag-SiO₂ Janus particles were characterized by scanning electron microscopy,scanning transmission electron microscopy,high-resolution transmission electron microscopy,energy-dispersive X-ray analysis,and UV-vis spectroscopy.Because of their specific functionalities,these Ag-SiO₂ Janus particles are proposed for applications on textile substrates,as they can overcome several drawbacks of direct application of AgNPs on textiles,such as leaching,agglomeration,and instability during storage.